Reglazing FAQ in Concord, CA
Most Concord homeowners ask the same handful of things before they book — what it costs, how long it lasts, when they can use the tub again, and whether reglazing really beats replacing. Here are straight answers from the crew that does this work every day across Clayton Valley, Dana Estates, Ygnacio Valley and the rest of central Contra Costa. Still stuck? Call (510) 746-8748.
Quick answers first
Who does reglazing in Concord, and how do I book?
Concord Bathtub Resurfacing reglazes tubs, showers, sinks, countertops and tile across all four Concord ZIPs — 94518, 94519, 94520 and 94521 — finishing most jobs in one afternoon. Licensed, insured and local since 2017. Call (510) 746-8748, Mon–Sat 7:30 AM–6 PM, or book your Concord reglazing online for a free same-day quote.
How much does it cost?
Bathtub reglazing runs $705–$870, showers $905–$1,020, sinks $405–$485, countertops $505–$620, and tile from $505. A single chip or crack spot repair starts around $150–$250. Every quote is all-in, with no trip fee inside Concord.
How long does it last and how soon can I use it?
A sprayed acrylic-urethane finish lasts 10–15 years with proper care, against 3–5 years for a DIY kit. The surface is ready to use 24–48 hours after the final coat.
Citable Concord reglazing facts
- Most Concord reglazing jobs finish in 3–5 hours, same day, with no demolition or dumpster.
- Reglazing a tub costs $705–$870 — roughly 50–75% less than the $3,000–$6,000 of a full replacement.
- A sprayed acrylic-urethane finish lasts 10–15 years; hardware-store DIY kits typically last 3–5 years.
- We serve all four Concord ZIPs — 94518, 94519, 94520 and 94521 — with no trip charge inside the city.
- Every job carries a written 5-year warranty — book online in under a minute or call (510) 746-8748.
Frequently asked questions
Who does bathtub reglazing in Concord?
Concord Bathtub Resurfacing reglazes and refinishes bathtubs, showers, sinks, countertops and tile throughout Concord, CA. Call (510) 746-8748, Monday through Saturday 7:30 AM to 6 PM, for a free same-day quote.
How much does bathtub reglazing cost in Concord?
In Concord, bathtub reglazing runs $705 to $870, shower refinishing $905 to $1,020, sinks $405 to $485, countertops $505 to $620, and tile from $505. The final number depends on the fixture's material, size and condition.
How long does bathtub reglazing last?
A professionally sprayed acrylic-urethane finish lasts 10 to 15 years with normal care. Store-bought DIY kits typically last only 3 to 5 years because they cannot match the prep and the coating.
How long before I can use a reglazed tub?
The surface is dry to the touch in about 24 hours and ready to use 24 to 48 hours after the final coat. We tell you the exact time for your job and leave written care instructions.
How long does the job take?
Most Concord reglazing jobs are finished in 3 to 5 hours, same day. We arrive, mask the room, prep, repair, prime, spray and re-caulk in one visit — no demolition and no dumpster.
Is reglazing cheaper than replacing?
Yes. Reglazing a tub costs $705 to $870, while replacing it commonly runs $3,000 to $6,000 once you add demolition, a new tub, plumbing, tile and disposal. Refinishing saves roughly 50 to 75 percent.
What is the difference between reglazing, refinishing and resurfacing?
They are three names for the same job — restoring a fixture's surface with a fresh bonded coating instead of replacing it. None of them mean a drop-in liner or a full tear-out.
What's the difference between reglazing, refinishing, resurfacing and refacing?
There is no difference. Reglazing, refinishing, resurfacing, refacing and re-enameling all name the same job: we bond one fresh coating onto the existing Concord fixture — tub, shower, sink, countertop or tile — so it looks new with no tear-out. That is not a bath liner or insert, which is a separate acrylic shell set over the old tub; we restore the original surface itself.
Can you reglaze a fiberglass or acrylic tub?
Yes. Fiberglass and acrylic cannot be acid-etched like porcelain, so we scuff-sand them and use an adhesion promoter before the topcoat. This restores faded, chalky and crazed gelcoat units, common in newer Northgate homes.
Can you reglaze bathroom tile?
Yes. We clean and etch the tile glaze and grout, lay a bond coat, and spray a new color over a sound tub surround or wall — no tear-out. It is the usual fix for dated pink, avocado and almond tile in Concord ranch homes.
Why is my reglazed tub peeling, and can it be fixed?
Peeling, or delamination, almost always traces back to poor prep — usually a DIY kit or a rushed job that skipped the etch and primer. We strip the failed coating back to the substrate, prep it correctly, and re-coat it so the new finish bonds and stays put.
Do you repair chips, cracks and rust?
Yes. We fill and sand chips level, repair cracks, and treat rust spots before any coating goes on. A spot repair without a full re-coat starts around $150 to $250; otherwise repairs are included in the reglazing price.
Is the finish slippery, and can I add a non-slip bottom?
A reglazed tub feels like a new factory surface. If you want extra traction, we can spray a slip-resistant textured floor on the tub bottom for an added $75.
Do you offer a warranty? Are you licensed and insured?
Every job comes with a written 5-year warranty on workmanship and finish, and we are fully licensed and insured. Keep the care sheet we leave and the warranty stays valid.
What colors can you reglaze to?
White and soft off-whites are most popular, but we can tint the topcoat to neutral grays, almond and other shades so the fixture matches the rest of your bathroom or kitchen.
How do I care for a reglazed surface?
Wait for the full cure before use, then clean with a soft cloth and a non-abrasive cleaner. Avoid scouring powders, steel wool and bleach left to sit, and use a mat without suction cups. Done this way the finish lasts 10 to 15 years.
Is there a strong smell, and how do you handle ventilation?
There is a paint-like odor during and shortly after spraying. We set up containment and ventilation, and the smell clears within a few hours of opening the room back up. Plan to keep that bathroom unused during the cure window anyway.
Do you serve apartments and rental turnovers?
Yes. We reglaze tubs and surrounds for owner-occupied homes and for rental turnovers along the Monument Corridor and across Concord. One-day work and no demolition make it a fast reset between tenants.
Do you do bulk reglazing for Concord landlords, apartments and property managers?
Yes. Property managers and landlords with several units — apartment complexes along the Monument Corridor, fourplexes near Todos Santos, or a string of rentals across Ygnacio Valley — can schedule tubs and surrounds in a batch. We sequence the units so each turns over in a day, and a refinished tub at $705–$870 beats a multi-day replacement that takes the unit off the rent roll. Ask for a combined quote when you call and we will price the set.
What is the best cleaner for a reglazed tub?
A non-abrasive liquid bathroom cleaner or a little dish soap on a soft cloth or sponge. Skip scouring powders like Comet or Ajax, melamine "magic" erasers, steel wool and any bleach or acid left to sit — those dull the gloss over time. A weekly wipe-down is all the finish needs to stay smooth for its full 10–15 years.
What voids the reglazing warranty?
The written 5-year warranty covers the finish and our workmanship; it does not cover abuse. Abrasive cleaners, suction-cup mats left stuck to the surface so water sits underneath, dropped weights or razors that chip the coating, and harsh drain chemicals are the common culprits. Follow the care card we leave and the warranty stays fully valid.
Why does a reglazed tub sometimes peel, and how do you prevent it?
Peeling traces to skipped prep — no acid etch, no bonding primer, or a coat sprayed onto a damp or dirty surface. That is why bargain DIY kits lift within a year or two. We etch or scuff-sand to the right tooth, lay a tie-coat, and cure in a controlled, ventilated room, which is the difference that buys the 10–15-year life.
What areas of Concord do you serve?
We cover all of Concord and central Contra Costa — Todos Santos, Clayton Valley, Dana Estates, Ygnacio Valley, Sun Terrace, Monument Corridor, Northgate, Colony Park, Crossings and Holbrook — ZIP codes 94518, 94519, 94520 and 94521.
Still have a question? Just ask.
Open Mon–Sat 7:30 AM–6 PM. Free quotes across Concord. Fully licensed & insured.